STK S Type Load Cell
The STK model S type load cell is produced from nickel-plated alloyed steel, weighing between 50~7500 kg.
It offers easy mounting with screw holes on the top and bottom.
The STK load cell works with high measurement accuracy in the compression and tension directions.
General usage area is tensile and plucking tests.
You can also look at STW model load cells for higher capacities.
| Capacity | : 50~7500 kg |
| Accuracy Class | : C3 |
| Minimum Load | : 0 kg |
| Maximum Intervals (nLC) | : 3000 |
| Minimum Verification Interval | : 10000 |
| Total Error | : ±0.022 %FS |
| Output Sensitivity (FS) | : 2.00 ± 0.005mV/V |
| Zero Balance | : ± 1 %FS |
| Input Resistance | : 380 Ω ± 20 Ω |
| Output Resistance | : 350 Ω ± 3 Ω |
| Isolation Resistance | : ≤ 5000 MΩ (100VDC) |
| Compansated Temperature | : -10 ˜ + 40 °C |
| Operating Temperature | : -30 ˜ + 70 °C |
| Excitation, Recommended Voltage | : 10 VDC |
| Maximum Excitation Voltage (Umax) | : 15 VDC |
| Safe Overload | : 150 % FS |
| Ultimate Overload | : 300 % FS |
| Ingress Protection (EN60529) | : IP 66 / IP68 |
| Element Material | : Steel / Stainless Steel |
| Cable | : 4x022mm² |
Français Login
