HLT Crane Over Load Sensor
HLT model load cell being mounted to the steel rope and provides measurement on the tension of the rope.
Its used in crane industry to have work safety and to prevent accidents that may cause loss of life and property by exceeding the capacity of the crane.
In addition HLT model load cell can be monted installed crane or can be mounted the rope of the new produced crane so it also gives your crane a weighing function.
HLT model load cells are plated by nickel to make it resistant to corrossion and rust.
| Capacity | : 2, 5, 10 ton |
| Accuracy Class | : - |
| Minimum Load | : 0 kg |
| Maximum Intervals (nLC) | : - |
| Minimum Verification Interval | : - |
| Total Error | : ±1 %FS |
| Output Sensitivity (FS) | : 1.2 ± 0.2mV/V |
| Zero Balance | : ± 1 %FS |
| Input Resistance | : 370 Ω ± 20 Ω |
| Output Resistance | : 350 Ω ± 2 Ω |
| Isolation Resistance | : ≤ 5000 MΩ (100VDC) |
| Compansated Temperature | : -10 ˜ + 40 °C |
| Operating Temperature | : -30 ˜ + 70 °C |
| Excitation, Recommended Voltage | : 10 VDC |
| Maximum Excitation Voltage (Umax) | : 15 VDC |
| Safe Overload | : 150 % FS |
| Ultimate Overload | : 300 % FS |
| Ingress Protection (EN60529) | : IP 66 |
| Element Material | : Alloyed Steel / Stainless Steel |
| Cable | : 4x022mm² |
1 ~ 100 Ton Capacity
Français Login
