LP635 Feed Mixer Load Cell
The LP635 model load cell is produced with a standard capacity of 5.7 tons to be used in horizontal and vertical feed mixers.
It provides dust and water resistance in IP 67 standard by closing the electronic circuit with the o-ring and an aluminum enclosure that completely surrounds it.
With the nickel coating on it, it gains durability against rusting and corrosion for many years.
When taken together with JB-HRC model collection boxes, it offers easy assembly with the IP 67 protected connector at the end of cable.
Capacity | : 5700 kg / 8550 kg |
Accuracy Class | : D1 |
Minimum Load | : 0 kg |
Maximum Intervals (nLC) | : 1000 kg |
Minimum Verification Interval | : 4000 kg |
Total Error | : ±0.01 %FS |
Output Sensitivity (FS) | : 0.942 / 0.628 ± 0.05mV/V |
Zero Balance | : ± 1 %FS |
Input Resistance | : 380 Ω ± 20 Ω |
Output Resistance | : 351 Ω ± 3 Ω |
Isolation Resistance | : ≤ 5000 MΩ (100VDC) |
Compansated Temperature | : -10 ˜ + 40 °C |
Operating Temperature | : -30 ˜ + 70 °C |
Excitation, Recommended Voltage | : 10 VDC |
Maximum Excitation Voltage (Umax) | : 15 VDC |
Safe Overload | : 150 % FS |
Ultimate Overload | : 300 % FS |
Ingress Protection (EN60529) | : IP 67 |
Element Material | : Steel |
Cable | : 4x022mm – 5 Meter |