WTM Strain Control Load Cell
WTM model load cell is produced from nickel-plated steel alloy or stainless steel.
The WTM model load cell is mainly used in textile and printing machines to measure the tension of yarn or printing paper.
It offers easy electrical installation with the 4-pin connector on it.
| Capacity | : 20, 50, 100, 200 Kg |
| Accuracy Class | : C1 |
| Minimum Load | : 0 kg |
| Maximum Intervals (nLC) | : 1000 |
| Minimum Verification Interval | : 5000 |
| Total Error | : ±0.05 %FS |
| Output Sensitivity (FS) | : 2.00 ± 0.005mV/V |
| Zero Balance | : ± 1 %FS |
| Input Resistance | : 400 Ω ± 30 Ω |
| Output Resistance | : 350 Ω ± 5 Ω |
| Isolation Resistance | : ≤ 5000 MΩ (100VDC) |
| Compansated Temperature | : -10 ˜ + 40 °C |
| Operating Temperature | : -30 ˜ + 70 °C |
| Excitation, Recommended Voltage | : 10 VDC |
| Maximum Excitation Voltage (Umax) | : 15 VDC |
| Safe Overload | : 150 % FS |
| Ultimate Overload | : 300 % FS |
| Ingress Protection (EN60529) | : IP 66 |
| Element Material | : Alloyed Steel |
| Cable | : 4x022mm² |
Français Login
