DSBO-Z Model Load Cell

DSBO-Z model load cell is produced from nickel-plated steel alloy or stainless steel between 7.5 tons ~ 30 tons capacities.

Bi-directional flexing capability provides much more precise and accurate measurement.

It can also be produced optionally with 0-10 V or 4-20 mA analog outputs.

It offers easy use with mounting kits specially produced for DSBO-Z.

Capacity	: 7.5 ~ 30 tons
Accuracy Class	: C2
Minimum Load	: 0 kg
Maximum Intervals (nLC)	: 2000
Minimum Verification Interval	: 6000
Total Error	: ±0.05 %FS
Output Sensitivity (FS)	: 2.00 mV ± 0.005mV/V
Zero Balance	: ± 0.02 %FS
Input Resistance	: 720 Ω ± 20 Ω
Output Resistance	: 700 Ω ± 2 Ω
Isolation Resistance	: ≤ 5000 MΩ (100VDC)
Compansated Temperature	: -10 ˜ + 40 °C
Operating Temperature	: -30 ˜ + 70 °C
Excitation, Recommended Voltage	: 10 VDC
Maximum Excitation Voltage (Umax)	: 15 VDC
Safe Overload	: 150 % FS
Ultimate Overload	: 300 % FS
Ingress Protection (EN60529)	: IP 68
Element Material	: Alloyed Steel / Stainless Steel
Cable	: 4x022mm²

DSBO-Z