FSM Compression Load Cell

FSM is a load cell has the features of double direction operation (push-pull) produced with high accuracy and high precision.

It is produced completely locally in our Konya factory with capacity options from 200 Kg to 3 tons.

Alloy steel is cleaned with the sandblasting method after being cured by heat treatment and after it is completely homogenized, it is coated with nickel in order to be more resistant to corrosion, so it offers trouble-free use in the most difficult conditions.

FSM's minimalist design adapts to a variety of industrial application enviroments.

Capacity	: 0.2, 0.5, 1, 2.5 Ton
Accuracy Class	: 0.5%
Minimum Load	: 0 kg
Maximum Intervals (nLC)	: –
Minimum Verification Interval	: –
Total Error	: ±0.5 %FS
Output Sensitivity (FS)	: 1.00 ± 0.005mV/V
Zero Balance	: ± 1 %FS
Input Resistance	: 750 Ω ± 20 Ω
Output Resistance	: 702 Ω ± 3 Ω
Isolation Resistance	: ≤ 5000 MΩ (100VDC)
Compansated Temperature	: -10 ˜ + 40 °C
Operating Temperature	: -30 ˜ + 70 °C
Excitation, Recommended Voltage	: 10 VDC
Maximum Excitation Voltage (Umax)	: 15 VDC
Safe Overload	: 150 % FS
Ultimate Overload	: 300 % FS
Ingress Protection (EN60529)	: IP 67
Element Material	: Stainless steel / Alloyed steel
Cable	: 4x022mm² – 2 Meter