WCL Compression Type Digital Load Cell

WCL Digital Load Cell is a printing-type load cell produced in the range of 10 to 50 tons, with IP 68 stainless and water resistance class.If digital load cells are used in vehicle scales, there is no need to use any mounting kit.

Thanks to the embedded ADC and communication card in digital load cells, load cells can communicate digitally with weighing indicators via CanOpen.

It is possible to connect the load cells to each other in a chain with 2 connectors in the WCL Digital Load Cell, so there is no need to use an external junction box.

With the connector, up to 32 load cells can be connected to each other.

Capacity	: 10, 20, 30, 40, 50 Ton
Accuracy Class	: C4
Minimum Load	: 0 kg
Maximum Intervals (nLC)	: 4000
Minimum Verification Interval	: 10000
Total Error	: ±0.01 %FS
Output Sensivity (FS)	: CanBus 2.0 with CanOpen
Zero Balance	: 9600 / 19200 Bps
Linearity	: ±0.02% FS
Repeabilityl	: ±0.01% FS
Isolation Resistance	: ≤ 5000 MΩ (100VDC)
Compansated Temperature	: -10 ̃ + 40 °C
Operating Temperature	: -30 ̃ + 70 °C
Excitation, Recommended Voltage	: 12 VDC
Maximum Excitation Voltage (Umax)	: 18 VDC
Safe Overload	: 150 % FS
Ultimate Overload	: 300 % FS
Ingress Protection (EN60529)	: IP 68
Element Material	: Alloyed Steel / Stainless steel
Cable	: 15 Meter